Products

Connector Kit-15" x 3/4" Gas/Elec,Copper w/CompFtg (CLAM)LLC

The Camco 15 in. water connector kit is for use with gas or electric water heaters where the cold water supply and hot water distribution lines are 3/4 in. copper (ie. not threaded), and a flexible gas connector is not needed or not allowed by codes.

Contractor's Hose - Heavy-Duty 25', 5/8" (E/F/S) (CARD) LLC

This hose is made of durable double layer flexible PVC material which makes it safe for water up to 100 degrees Fahrenheit which makes it drinking water safe. Has a 300 psi burst strength rating and also comes with a 10 year replacement warranty.

Contractor's Hose - Heavy-Duty 50', 5/8" (E/F/S) (CARD) LLC

Camco's 50' heavy-duty contractor's drinking water hose is a reinforced 5/8" inside diameter hose that is 20 percent thicker than standard hoses. The anti-kink design features machined fittings and strain-relief ends for added durability. The hose is made of drinking water safe material. CSA low lead content certified. Complies with California’s AB1953 and Vermont Act 193 Low Lead Laws.

Dielectric Heat Traps, 3" Long, Paired (E/F/S) LLC

Dielectric Heat Traps,2-1/2" Long, Flapper, Pair (E/F)

Dielectric Nipples, 3/4"NPT x 3/4"NPT x 2-1/2"L (2/CARD) LLC

The Camco 2-1/2 in. dielectric nipples are designed for use in water heater inlet and outlet hookups, and for other uses where dissimilar metals occur in piping and pluming systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in. NPT tapered pipe thread for a fluid-tight seal. The dielectric nipples measure 2-1/2 in. in length and are sold in a convenient 2-pack. Tools for installation are not included.

Dielectric Nipples, 3/4"NPT x3/4"NPT x2-1/2"Long(BULK-CC)LLC

Dielectric Union, 3/4" NPT, Paired (E/F/S) LLC

DIELECTRIC UNIONS - Use CAMCO Dielectric Unions wherever dissimilar metals occur in piping and plumbing systems. Use with water heaters, water storage tanks, water conditioners, water pumps and steam lines.  Compliant with all federal and state level low lead laws. CSA Low Lead Content Certified to NSF/ANSI 372

Dip Tube - 48" Long, Threaded 3/4" X 2-1/2" Nipple,LLC(25Pk)

Dip Tube - 52" Long, Flared w/Gasket, LLC (E/F)

The Camco flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length. Comes with gasket included.

Dip Tube - 52" Long, Flared, LLC (E/F)

The Camco flared dip tube is 52 in. long and can be cut to the desired length. It does not come with a gasket. It is designed to direct incoming cold water to the bottom of the tank. It is made of PEX material.

Element, Flat Flange - 3500W 240V HWD (E/F/S)

Element, Flat Flange - 4500W 240V LWD Foldback (E/F/S)(SKPK)

Element, Screw In - 1000W 120V HWD (E/F/S) (Clam)

Element, Screw In - 1000W 120V HWD (E/F/S) (Clam)

Element, Screw In - 1500W 120V HWD (E/F/S) Clam

Element, Screw In - 1500W 120V HWD (E/F/S) Clam

Element, Screw In - 1500W 120V LWD (E/F/S) (Clam)

Element, Screw In - 1500W 240V HWD (E/F/S) Clam

Element, Screw In - 1650W 120V HWD (E/F/S) (Clam)

Element, Screw In - 1750W 120V HWD (E/F/S) (Clam)

Element, Screw In - 2000W 120V HWD (E/F/S) Clam

Element, Screw In - 2500W 240V HWD (E/F) Clam

Element, Screw In - 2500W 240V LWD Foldback (E/F/S) (Clam)